Name: DPA Microphones MMP-F Modular Active w/Gooseneck Top and Bottom - 18"
SKU: 2031516

Product Details ＋

The MMP-F Modular Active Boom, 45cm with Gooseneck Top and Bottom by DPA Microphones is a preamplifier and output stage for DPA Reference Standard MMC series capsules. The modular capsule attaches to the MMP-F preamplifier. When used with a DPA microphone capsule it provides power for podium, floor stand, or table top microphone. The MMP-F provides and XLR output and 48V phantom power via an external source. It features impedance balancing with active drive and has excellent radio frequency rejection. The optional stands are sold separately.

Compatible With The Following Capsules:
MMC4006 Omni Microphone Capsule
MMC4007 Omni Microphone Capsule, 12mm
MMC4011 Cardioid Microphone Capsule
MMC4015 Wide Cardioid Microphone Capsule
MMC4017 Shotgun Microphone Capsule
MMC2006 Twin Diaphragm Omni Microphone Capsule
MMC2011 Twin Diaphragm Cardioid Microphone Capsule

DPA Microphones MMP-F45 Specs

Output Connector	XLR-3M. Pin 1: shield, Pin 2 signal phase, Pin 3: - phase
Low-Cut Filter	-3 dB: 15 Hz
Noise	Noise with shorted input, A-weighted: 0.6 µV
Output Voltage	RMS: 2.2 V Peak: 3.1 V
Type Of Electronic Circuit	Active
Total Harmonic Distortion (THD)	@1VRMS, 1kHz: < 0.2 %
Dynamic Range	131 dB
Output Impedance	100 Ω
Minimum Load Impedance	2 kΩ
Current Consumption	3.5 mA
Output Balance Principle	Impedance balancing
Common Mode Rejection Ratio	> 40 dB
Power Supply	For Full Specifications: 48 V Phantom power (± 4 V)
Cable Drive Capability	328' (100 m)
Filters	High Boost: 4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Temperature	-40 to 113 °F (-40 to 45 °C)
Relative Humidity	Up to 90%
Diameter	0.75" (19 mm)
Boom Length	45 cm
Dimensions	1.6 x 0.75" (41 x 19mm)
Weight	Not listed by manufacturer